♥Spring Symphony ♥

This tutorial was written by me on April 29, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Creative Scraps by Crys Called By the Spring Symphony can be purchased here


I used the artwork of Barbara Jensen You have to be licensed to use this artwork and it can be purchased here


Plug-in Needed
Lokas Software - 3D Shadow
Tramages – Tow the Line


1.Open up your SS_PaperRibbon copy and paste as new layer resize 60%, Apply Mura's Filter Meister-copies with these setting Encircle,Circle Tile MOde Behind,12,56,56 rest deflaut setting, Click inside with your magic wand expand by 6 add new layer flood with SS_Paper7


2.Duplicate frame layer and send to bottom,Adjust – Blur – Gaussian – 15,Apply Tramages – Tow the Line 80,54,48,9


3.Click inide your SS_paperribbon modify expand by 6 copy and paste as new layer selections invert delete on keybroad,Layer Properties: normal, Opacity 40 on tube layer underneath the frame.,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your SS_FlowerSwirl copy and paste as new layer resize 60% Duplicates Image Mirror,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your SS_MusicNotes copy and paste as new layer ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your SS_FlowerDoodle2 copy and paste as new layer ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥Mommy I Love ya♥

                                                                             

This tutorial was written by me on April 28, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Bubble's Dream Called Love You Mum you can get here


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow
xero: Fritillary


Mask #Big Mask 1 By Vix and can be found here ty vix


1.Open YOur element01 copy and paste as new layer,take your magic wand click inside both windows modify expand by 6 add new layer under frame layer flood with paper17 into selections,


2.Open up your Tube copy and paste in behind your frames layers Take your selections make rectangle around head part and go to your promote selections layer and cut,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your Element39 copy and paste as new layer resize 70%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your Element24 copy and paste as new layer Free rotate to left 15.00,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your Element 30 copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your Element15 copy and paste as new layer, Duplicates Image Mirror,Merge down,Duplicates Image Flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Apply your mask of Choice I Use Vix_BigMask001,Apply xero: Fritillary default setting


Add any copyrights and your name.


I hope you enjoyed my tutorial and come visit again real soon!

♥Spring Garden♥

This tutorial was written by me on April 27, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Rebellious Scraps Called  SpringGarden at purchased here


I used the artwork of Dean Yeagle You have to be licensed to use this artwork and it can be purchased here


Mask of choice. I'm using Mask11 in set3 by BrutalDesigns


Plug-ins used
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow


Open a new canvas 700x700 *92dpi* Transparent


1.Open up your Grass3 copy and paste as new layer resize 80%, Apply Xero Fritilliary,with these setting 6,20,19,21,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your Frame3 copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your tube copy and paste behind your Grass layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your pollen copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your fence 2 copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your dragonflies copy and paste as new layer Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your birdhouse copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your leaves 1 copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black. then Duplicates

♥Denim Girl♥

This tutorial was written by me on April 26, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Mystical Illusionz Called Daisies and Blue Jeans at purchased here


I used the artwork of Keith Garvey You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow
Penta.com - Dot and Cross, and Jeans
EyeCandy4000- gradient glow


1.Open up your miz12-dd-ele39 copy and paste as new layer resize 70%,take your magic wand click inside modify expand by 6, add new layer flood with miz12-dd-pp02,Apply penta.com Dot and Cross. Settings: Amount = 255. Cross Distance = 10. Cross width = 7,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.On your frame layer select all float defloat promote selections layer.Open up your Tube copy and paste in behind your frames layers Take your selections make rectangle around head part and go to your promote selections layer and cut,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Add the words Denim Girl Select all float defloat Adjust add remove noise with these setting Random and Monchrome Noise 100%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your miz12-dd-ele10 copy and paste as new layer resize 60%,Image Mirror Merge down move down under your denim girl,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open u miz12-dd-ele11 copy and paste as new layer,Image Mirror Merge down move down under your Frame layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your miz12-dd-ele33 copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your miz12-dd-ele48 copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your miz12-dd-pp04 Apply your mask WSL_Mask178


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥SpringLove♥

This tutorial was written by me on April 24, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by DesignedByStina Called HopeSpringsEternal buy it at here


I used the artwork of Suzanne Woocott You have to be licensed to use this artwork and it can be purchased here

Yvette_EOC_Template32.pspimage this template i use you can get here
Plug-ins needed:
Lokas Software - 3D Shadow
DSB-Flux:Bright Noise


1.Click on your Raster1 select all float defloat add new layer flood with #abb533,Apply xero: Fritillary with these settings: 3,30,10,20,Apply Gradient Fat White line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your Raster2 select all float defloat add new layer flood with #abb533,Apply xero: Fritillary with these settings: 3,30,10,20,Apply Gradient Fat White line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your Raster3 select all float defloat add new layer flood with #abb533,Apply xero: Fritillary with these settings: 3,30,10,20,Apply Gradient Fat White line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Click on your Raster4 select all float defloat add new layer flood with #7fc6bd,Apply xero: Fritillary with these settings: 3,30,10,20,Apply Gradient Fat White line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your Raster5 select all float defloat add new layer flood with #7fc6bd,Apply xero: Fritillary with these settings: 3,30,10,20,Apply Gradient Fat White line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your DBS_Frame02 copy and paste as new layer resize 50%x2,Take your magic wand click inside add new layer flood with DBS_Paper04,Apply xero: Fritillary with these settings: 6,30,23,15,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black. Sent to bottom


7.Open up your Tube copy and paste as new layer ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your DBS_flowers05 copy and paste as new layer resize 50%x2 take your selections tool and draw rectangle bottom of your flowers and cut what hanging from your flowers,Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Open up your DBS_flowers05 Image Rotate to left copy and paste as new layer resize 50%x2,selections tool and draw rectangle bottom of your flowers and cut what hanging from your flowers,Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add any copyrights and your name.


I hope you enjoyed my tutorial and come visit again real soon!


~*~*~Open animation~*~*~


Copy merged. Open up Animation Shop. Paste as a new animation in AS. Back in PSP. go to Edit


Go to Your DBS_Frame02 apply BrightNoise with these setting Intensity:33,Directions:Mix,Merge Layer Copy and paste in Animation Shop,paste after current layer


Undo BrightNoise Apply BrightNoise again but hit the random seed button. Copy merged and paste after the first frame in AS.


Repeat the above stop one more time so you have a total of 3 frames. Select all frames (CTRL+A) Change the frame properties to 13.


Optimize and save as GIF.

♥Cupcake Wars♥

This tutorial was written by me on April 21, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Creative Scraps by Crys Called By the Cupcake Wars can be purchased here


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow


Open a new canvas 700x700 *92dpi* Transparent


1.Open up your CCW_element_46 copy and paste as new layer resize 70%,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.OPen up your CCW_Frame_4 copy and paste as new layer Image-Free Rotate 14.00 right,Take your magic wand click inside modify expand by 6,copy and paste your CCW_Paper_12 into selections,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your tube copy and paste as new layer, Go Back to your Frame layer selections promote selections in layer, on this layer make rectangle around your tube head and cut part of frame,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your CCW_Element_52 copy and paste as new layer resize 65% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your CCW_Element_7 copy and paste as new layer resize 40% Duplicate 2times for total of 3,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your CCW_Element_2 copy and paste as new layer resize 40% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your CCW_Element_31 copy and paste Image Rotate for left, Image Mirror,then Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your CCW_element_61 copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

♥Happy mother day♥

This tutorial was written by me on April 19, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by SizzelsDesigns Called LoveRoses buy it at here


Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow


Template 01 from Scrapity Scrap and More you can get here


Open up your template in psp.
Duplicates (Shift+D) And Close out the original.
Delete Following credit layer.


1.Click on your Raster2 And Raster6 select all float defloat add new layer Flood with #920f0f,Apply xero: Fritillary with these settings: 3,30,10,20, Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


2.Click on your Raster3 And Copy of Vector 5 select all float defloat add new layer Flood with #c83b3b ,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


3.Click on your Raster4 select all float defloat add new layer Flood with #920f0f,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


4.Click on your Copy of Vector 2 select all float defloat add new layer Flood with #c83b3b ,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


5.Click on your Raster5 select all float defloat add new layer Flood with #920f0f,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


6.Click on your Copy of Vector 3 select all float defloat add new layer Flood with #c83b3b ,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


7.Click on your Raster7 select all float defloat add new layer Flood with #920f0f,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


8.Click on your Copy of Vector 4 select all float defloat add new layer Flood with #c83b3b ,apply xero: Fritillary with these settings: 3,30,10,20,Effect 3D Effects dropshadow with these settings: V-H:0 Opacity:50 Blur:8.00 color:Black


9.Open up your SD_GroupRoses copy and paste as new layer resize 50%,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
Add any copyrights and your name


I hope you enjoyed my tutorial and come visit again real soon!

This is an awesome result from Lori Thankyou Hun Love it ♥

 

♥PuppyTails♥

This tutorial was written by me on April 19, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Alika's Scraps Called Puppy Tails at purchased here


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
xero: Fritillary


Open a new canvas 700x700 *92dpi* Transparent


1.Open up your as14 copy and paste as new layer resize 50%,Take your magic wand click inside modify expand by 6, add new layer flood with as_paper1,Apply Xero-Fritillary with these setting,5,55,11,17


2.Open up your Tube, Go to your Paper layer select all float defloat copy and paste your tube selections invert delete on keybroad,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.,Layer Properties: normal, Opacity 40 on tube layer


3.Open up your Tube copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.



4.open up your as47 copy and paste as new layer resize 60%,Duplicates Image flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your as67 copy and paste as new layer resize 60%,Duplicates Image flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your as08 copy and paste as new layer resize 30% & 50% ,Duplicates total of 3,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your as09 copy and paste as new layer resize 30% & 50% ,Duplicates total of 3,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your as10 copy and paste as new layer resize 50%,Imafe Free rotate right 90.00,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.open up youras103 copy and paste as new layer resize 70%,Sent top your mask layer,Duplicates move it top little bit,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add any copyrights and your name


I hope you enjoyed my tutorial and come visit again real soon!

notes

I been thinking change my blog around just have links to tuts from my main blog to my tut blog i am not sure how i am going to do that yet

♥Melody♥

This tutorial was written by me on April 18, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Stef's Scrapkits Called SpringBeauty at purchased here


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow
DSB-Flux:Bright Noise
EyeCandy4000- gradient glow


Template Sarahs Tags N things called spring stops here, ty hun for your template :) you can get here


Open up your template in psp.
Duplicates (Shift+D) And Close out the original.
Delete following:Infor & Raster6 and copy of raster6


1.CLick on your Raster2 select all float defloat add new layer flood with #bdaa82,Apply Effect texture effects blinds with these setting,Width:4 Opacity:50 Light from left/top horizontal unchecked color:white,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your Copy of Raster 2 select all float defloat add new layer flood with #bdaa82,Apply Effect texture effects blinds with these setting,Width:4 Opacity:50 Light from left/top horizontal unchecked color:white,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Merge these 2 layer together,Select all float defloat select selections borders outside border width 10,add new layer flood with #dfd7a9,Apply Effect texture effects blinds with these setting,Width:4 Opacity:50 Light from left/top horizontal unchecked color:white,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.Merge down,


4.Duplicates Close off your bottom layer we going use your top layer we use layer


5.Open up your ele48_SpringBeauty_Stef'sScrapkits copy and paste as new layer resize 60% Duplicates move beside other one then merge down, duplicate Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your ele23_SpringBeauty_Stef'sScrapkits copy and paste as new layer resize 60% Duplicates Image,Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.CLick on your Raster3 select all float defloat add new layer flood with #dfd7a9,Apply Effect texture effects blinds with these setting,Width:4 Opacity:50 Light from left/top horizontal unchecked color:white,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Click on your Raster 1 select all float defloat add new layer flood with #bdaa82,Apply Effect texture effects blinds with these setting,Width:4 Opacity:50 Light from left/top horizontal unchecked color:white,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Open up your Tube copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


10.Take yourmagic wand click on your tube where easel,Open up your ele21_SpringBeauty_Stef'sScrapkits selections invert delete on keybroad,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


11.Open up your ele01_SpringBeauty_Stef'sScrapkits Duplicates Image Mirror ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


12.Open up your word text, copy and past as new layer resize 50%,Adjust – Hue&Saturation with these setting H:34-S224, then Apply Gradient glow color:#b6c94d,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


13.Open up your ele33_SpringBeauty_Stef'sScrapkits copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


on to your raster 6, texture effects Mosiac antique default,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add any copyrights and your name


I hope you enjoyed my tutorial and come visit again real soon!


~*~*~Open animation~*~*~


Copy merged. Open up Animation Shop. Paste as a new animation in AS. Back in PSP. go to Edit


Go to Your ele23_SpringBeauty_Stef'sScrapkits0 apply BrightNoise with these setting Intensity:33,Directions:Mix,Merge Layer Copy and paste in Animation Shop,paste after current layer


Undo BrightNoise Apply BrightNoise again but hit the random seed button. Copy merged and paste after the first frame in AS.


Repeat the above stop one more time so you have a total of 3 frames. Select all frames (CTRL+A) Change the frame properties to 13.


Optimize and save as GIF.

37 

This is an awesome result from DixieThankyou Hun Love it ♥

 

♥EleganceSpring♥

This tutorial was written by me on April 18, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by EmJay Scraps Called springtime buy it at Inspirations Of Scrap Friends


I used the artwork of AnnaMarine You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow
DSB-Flux:Bright Noise


Open a new canvas 700x700 Transparent


1.Open up your emjay_springtimeelement33 copy and paste as new layer,take your magic wand click inside modify 6 add new layer resize 90% flood with emjay_springtimepapers05Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your emjay_springtimeelement32 copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your Tube copy and paste as new layer resize 80%,Layer Properties: normal, Opacity 40 on tube layer,Duplicate Image Then Change Opacity to 100,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your emjay_springtimeelement44 copy and paste as new layer duplicates Image Mirror,



5.Open up your emjay_springtimeelement29 Copy and paste as new layer ,Duplicates Image Mirror,Merge down,Sent to bottom,then Duplicates Image Flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your emjay_springtimeelement21 copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Apply your mask


Add any copyrights and your name.


I hope you enjoyed my tutorial and come visit again real soon!


~*~*~Open animation~*~*~


Copy merged. Open up Animation Shop. Paste as a new animation in AS. Back in PSP. go to Edit


Go to Your emjay_springtimeelement29 apply BrightNoise with these setting Intensity:33,Directions:Mix,Merge Layer Copy and paste in Animation Shop,paste after current layer


Undo BrightNoise Apply BrightNoise again but hit the random seed button. Copy merged and paste after the first frame in AS.


Repeat the above stop one more time so you have a total of 3 frames. Select all frames (CTRL+A) Change the frame properties to 13.


Optimize and save as GIF.

♥Mad-Hatter♥

This tutorial was written by me on April 16, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Creative Scraps by Crys Called By the AMadTeaParty can be purchased here


Artwork by©NoFlutter used with General Permission


Plug-ins used:
Lokas Software - 3D Shadow


Open a new canvas 700x600 Transparent


1.Open up your AMTP_Frame_5 copy and paste as new layer resize 80%,take your magic wand click inside modify by 6,add new layer flood with your AMTP_Paper_13,Merge down, Free Rotate with these setting:Left 10.00,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your AMTP_Frame_5 copy and paste as new layer resize 70%,take your magic wand click inside modify by 6,add new layer flood with your AMTP_Paper_13,Merge down,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your AMTP_Element_42 copy and paste as new layer duplicates Image Flip,Merge down,duplicates Mirror sent top of your mask layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your AMTP_Element_65 copy and paste as new layer duplicates Image mirror,Merge down Sent to top of your mask layer, sharpen then Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your AMTP_Element_23 copy and paste as new layer sharpen,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your AMTP_Element_22 copy and paste as new layer sharpen,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your Tube Copy and paste as new layer resize 80%,sharpen,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your AMTP_Element_21 copy and paste as new layer sharpen,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

♥Hush---shh♥

This tutorial was written by me on April 16, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by SweetCravingsScraps Called Hush at purchased here


I used the artwork of Keith Garvey You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
xero: Fritillary&
photoeffex-scanlines


Template from Beckeyp creations 160 you can get, Thanks Hun here


Open up your template in psp.
Duplicates (Shift+D) And Close out the original.
delete following:Infor and all Shadow(delete)and delete scallop trim, trim,flower2
Image Canvas Size :700x700


1.Click on your Background Square2 select all float defloat add new layer flood with #482e5b,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your Background Square1 select all float defloat add new layer flood with #482e5b,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your Frame3Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


4.Click on your Frame2Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


5.Click on your Frame1Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


6.Click on your Frame3 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Click on your Frame2 Square2 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Click on your frame1 Square2 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Click on your Small Frame3Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


10.Click on your Small Frame2Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


11.Click on your Small Frame1Fill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


12.Click on your Small Frame3 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


13.Click on your Small Frame2 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


14.Click on your Small Frame1 select all float defloat add new layer flood with #816395,Apply Xero-Fritillary with these setting 3,55,11,8,Apply Gradient Fat White linbe frist, then apply again with this color #aee8ea,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


15.Open up your Tube Copy and paste as new layer resize 80%x2,apply Xero Porcelain with settings at 50, 120, 140, 122, 47 and 96,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


16.Click on your flowerfill select all float defloat add new layer flood with #8ad3d6,Apply photoeffex-scanlines with these settings, 2,2,20,10,2,2 vertical toggle checked


17.Open up your SCS_Hush_LittleOldLady,SCS_Hush_LittleBear,SCS_Hush_LittleMouse copy and paste as new layer resize 40%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


18.Open up your SCS_Hush_WordArt copy and paste resize 50%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥This Way Funny Bunny♥

This tutorial was written by me on April 13, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Lise-Lotte Sunesen Called FunnyBunny you can get here


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
xero: Fritillary
Mura - Meister


Tag Template I Choice was From Tracy F Design template 44 you can get here


Open up your template in psp.
Duplicates (Shift+D) And Close out the original.
Delete Following © and RECTANGLES
Image Canvas size 700x700


1.Click on your SQUARES select all float defloat,copy and paste your lhsGRASS_kitFunnyBunny_1 as new layer resize 60%, selections invert delete on keybroad,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your SQUARES select all float defloat add new layer flood with lhsPAPER_kitFunnyBunny_9 copy and past into selections,apply Xero-Fritillary default setting


3.Click on frame Take your Magic wand Click inside of frames open up your lhsTREE_kitFunnyBunny_1 resize 30%x2 place inside your frame selctions invert delete on your keybroad, Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Click on your FRAMES select all float defloat add new layer flood with #fffeae,apply Xero-Fritillary with these setting 5,30,29,8,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your lhsBUNNY_kitFunnyBunny_1 resize 30% copy and paste as new layer resize again at 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Merge All these layers together


7.Click on your CIRCLE select all float defloat add new layer flood with lhsPAPER_kitFunnyBunny_9 copy and past into selections,apply Xero-Fritillary default setting,select all float defloat selections modify expand by 6, select selections border with these setting inside border 10 add new layer flood with #fffeae,apply Xero-Fritillary default
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your lhsFLOWER_kitFunnyBunny_15 copy and paste as new layer resize 50%,Apply Mura - Meister Copie with these settings Line,Wraparound Behind,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Open up your Tube copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


10.Open up your lhsTAG_kitFunnyBunny_2 resize 50% copy and paste as new layer ,Image Free rotate left,7.00 and Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


11.Open up your lhsARROW_kitFunnyBunny_1 resize 50% copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


12.Take your choice font put funny bunny,gradientglow, Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.resize 80%


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥Hippity Hop-Easter♥

This tutorial was written by me on April 12, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Gina's Gems Scraps Called Hippity Hop buy it at Inspirations Of Scrap Friends


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Open up your template in psp
Duplicates (Shift+D) and close the original
Delete Following: Tracy.F.Designz, Oval and heart
Canvas size 700x600


Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
xero: Fritillary


Template by Freebie Friends Scraps And More . by Tracy.F Designz -Tracy’s Easter Template #2. can be downloaded here

1.Open up your GGS_Hippity Hop_Frame 5 copy and paste as new layer resize 50%,Image Free Rotate Right 7.00,sent to bottom, take your magic wand click inside frame modify expand by 6, add new layer flood with #8fdbce,apply Xero-Fritillary with these setting 3,55,11,8,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black. Duplicates Image Mirror,Duplicates Image Flip


2.Click on your Glitter Rectangle select all float defloat add new layer flood with #cff3d7,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your Rectangle select all float defloat add new layer flood with #d9f5c3,add new layer copy and paste your GGS_Hippity Hop_Frame 5 into selections, keep select add new layer flood with #8fdbce, apply Xero-Fritillary with these setting 5,55,11,8,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Go back to your rectangle select all float defloat copy and paste your GGS_Hippity Hop_Easter Tree 2 as new layer resize 50% then invert delete on keybroad,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your GlitterCircle select all float defloat add new layer flood with #cdf1d5,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Click on your Circle select all float defloat add new layer flood with #8fdbce,apply Xero-Fritillary with these setting 5,55,11,8,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Go back to your circle select all float defloat copy and paste your GGS_Hippity Hop_Easter Tree 2 as new layer resize 50% then invert delete on keybroad,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Click on your Glitter Strip select all float defloat add new layer flood with #8fdbce,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Click on your Strip select all float defloat add new layer flood with #8f9f00,apply Xero-Fritillary with these setting 5,55,11,8,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


10.Open up your GGS_Hippity Hop_Flower Cluster 1 copy and paste as new layer resize 80%, Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


11.Open up your GGS_Hippity Hop_Grass with Flowers copy and paste as new layer resize 60% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


12.Open up your GGS_Hippity Hop_Flower Cluster 2 copy and paste as new layer resize 65%, Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


13.Open up your Tube Copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


14.Open up your GGS_Hippity Hop_Duckling 2,GGS_Hippity Hop_Duckling 1 copy and paste as new layer resize then 50%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


15.Click on your Text layer gradient glow white fat line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥LovingSummerBanner♥

his tutorial was written by me on April 11, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components


Scrapkit of choice: I used a PTU kit by Tootypup Scraps Called SummerLovin buy it at Scrap Wishes

Pattern and myframe you can get here

Plug-ins used:
Muras Meister - Copies


1.Add new layer,Open up my frame select all copy and paste into selections


2.Open up tp-paper-13 Resize50%x2 copy and paste as new layer,Apply Muras Meister Copies - Wall Paper Rotate,Duplicate,Go on the Original Layer,Adjust - Blur - Motion Blur, with these setting Angle:90.00 Strength:100,Go on Copy Layer Adjust - Blur - Radial Blur with these setting:blur type:Twirl,Blur:50,0,Center:0,0,10 elliptical check,Effect - Edge Effects - Enhance More
Filter DSB Flux Linear Transmission with these setting 15,12,50 Horizontal.


3.Open up my pattern, Add new layer copy and paste pattern in to selections,select all float defloat Invert go to your copy layer press delete on your keybroad,invert Select - Modify - Select Selection Borders with these setting both sides,anti-alias checked border width-2, apply Adjust - Add Noise with these setting random, monochrome check noise-100


4.Delete My Pattern layer


5.Go to your copy raster 3 apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


6.Open up your tp-parkBench3 copy and paste as new layer resize 50% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your tp-palmtree-1 copy and paste as new layer resize 50% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your tp-kite2 copy and paste as new layer resize 50% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Take your text put your name,convert to raster layer, gradient glow,Now give Inner Bevel with these setting bevel#2 width:10,Smoothness:25,Depth:7,Ambience:11,Shininess:35,Angle:135,
Intensity:20,Elevation:71,


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥Natural Passion♥

This tutorial was written by me on April 10, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components


Scrapkit of choice: I used a PTU kit by BLT Dezignz Called April's Birthstone Kit - Diamond you can get here


I used the artwork of JenniferJanesko You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
Xero - Porcelain


Tag Template I Choice was From Tracy F Design template 41 you can get here


Open up your template in psp
Duplicates (Shift+D) and close the original
Delete Following: Tracy.F.Designz, Text
Canvas size 700x600
Go to your Square layer resize 120% move over bit


1.Click on your Oval select all float defloat add new layer flood with your BLT_APrDia_pp5 into selections,Apply Gradient Glow Fat line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your strip select all float defloat add new layer flood with your BLT_APrDia_pp11 into selections,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your strip frame select all float defloat add new layer flood with your BLT_APrDia_pp13 into selections,Apply Gradient Glow Fat line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your BLT_AprDia_Stringh copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your Square Frame select all float defloat add new layer flood with your BLT_APrDia_pp13 into selections,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Keep select Open up your tube copy and paste as new layer selections invert delete on keybroad,Add Xero Porcelain with settings at 50, 121, 134, 146, 64 and 12,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.Change Blend mode to Luminance (legacy)


7.Click on your Square select all float defloat add new layer flood with your BLT_APrDia_pp11 into selections,Apply Gradient Glow Fat line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your BLT_AprDia_Petals copy and paste as new layer resize 60%,duplucates Image Mirror, Merge Down, Image Free Rotate with these setting Direction:right,Degrees 90%, sent to bottom,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Open up your BLT_AprDia_Bracelet copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


10.Open up your BLT_AprDia_Butterflies take your freehand circle one of butterflies copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


11. Open up your BLT_AprDia_Butterflies copy and paste as new layer resize 60%,sent behind your square layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

Add your copyright info and your watermark/logo

I hope you enjoyed my tutorial and come visit again real soon!

♥A breath of tenderness♥

This tutorial was written by me on April 9, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components


Scrapkit of choice: I used a PTU kit by DELICATE-PEARL Called A breath of tenderness buy it at scrappinwithFriends


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow
Xero Fritillary
EyeCandy4000- gradient glow


1.Open up your DPl - A breath of tenderness - element10 copy and paste as new layer resize 60% duplicates Image Mirror,merge down, duplicate Image Flip,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your Circle select all float defloat add new layer #c7d7a5,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your Rectangle select all float defloat add new layer #57711e,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your DPl - A breath of tenderness - element24 copy and paste as new layer resize 60%, duplicates Image Mirror,merge down, duplicate Image Flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your Frames select all float defloat add new layer #8a6d89,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Click on your Squares select all float defloat add new layer #f5ddf3,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your Tube , take your magic wand click inside your frame, copy and paste your Tube selections invert delete on your keybroad,Duplicates Image Mirror,sharpen,Change the properties Opacity of the tube layer to 80,Copy and paste your Tube ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your DPl - A breath of tenderness - element26 copy and paste as new layer resize 60%,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥notes♥

I will have new tut up soon i had find all my plug and i redo pc off what mess i had and install all . new tuts after work tomorrow or monday

♥BD Template-10♥

Click on view to download

♥Good Night Angel♥

This tutorial was written by me on April 4, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Designs By Chance Called Good Night Angel ScrapKit at purchased here


I used the artwork of Keith Garvey You have to be licensed to use this artwork and it can be purchased here


Plug-ins needed:
Lokas Software - 3D Shadow


Open a new canvas 700x600 Transparent


1.Open up your DBC_goodnightangel_window copy and paste as new layer resize 50% then resize 60%,take your magic wand click inside modify expand by 10,add new layer flood with your DBC_goodnightangel_p8 into selections,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your DBC_goodnightangel_border2 copy and paste as new layer resize 50%x3 then resize 60% Duplicates move one top your windows,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your DBC_goodnightangel_angel7 copy and paste as new layer resize 50%x3 then resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Go Back to your raster3 select all float defloat, add new layer copy and paste your tube into selections change blend mode too Luminance(legacy), copy and paste your tube again resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your DBC_goodnightangel_flower1 copy and paste as new layer resize 50%x2 then resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your DBC_goodnightangel_flower3 copy and paste as new layer resize 50%x2 then resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your DBC_goodnightangel_bow2 copy and paste as new layer resize 50%x3 then resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your DBC_goodnightangel_cow copy and paste as new layer resize 40%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥TenderEaster- -Banner♥

This tutorial was written by me on April 3, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Bubble's Dream Called TenderEaster you can get here


my Pattern here


Plug-ins used:
Muras Meister - Copies
AAA Frame - Foto Frame
Tramages - Tow The Line


Open a new Canvas 852x315 Transparent


1.Flood with with your color #9093c1


2.Add new layer apply Tramages - Tow the Line, these are the setting I used: Control 0 - 51 ,Control 1 - 32,Control 2 - 133,Control 3 - 22


3.Add new layer open my pattern select all copy and paste into selections,,add new layer flood with #fad5d6,Select - Modify - Select Selection Borders Bothside,Anti-alias check,border width:2,flood with #e4f9e4,add noise with these setting Random,monochrome,noise:100%,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black


4.Open up your Element38 copy and paste as new layer resize 60% duplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black, apply sharpen


5.Apply Filter AAA Frame - Foto Frame with these setting:Default Width:12,Red:20 Opacity:80


6.Open up your Element28 copy and paste as new layer, duplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black, apply sharpen


7.Open up your Element31 copy and paste as new layer,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥Easter Feelings -Banner♥

This tutorial was written by me on April 3, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Sleek n Sassy Designz Called Easter Feelings you can get here


CheckPAttern by me you can get here


Plug-ins used:
Muras Meister - Copies
AAA Frame - Foto Frame
DSB Flux Linear Transmission


Open a new Canvas 852x315 Transparent


1.Selcet all Open up your EF_Element58 copy and paste into selections,Muras Meister Copies - Wall Paper Rotate
Duplicate,Go on the Original Layer,Adjust - Blur - Motion Blur, with these setting Angle:90.00 Strength:100,Go on Copy Layer Adjust - Blur - Radial Blur with these setting:blur type:Twirl,Blur:50,0,Center:0,0,10 elliptical check,Effect - Edge Effects - Enhance More
Filter DSB Flux Linear Transmission with these setting 15,12,50 Horizontal


2.Open up my pattern, add new layer copy and paste into selections,select all float defloat, add new layer flood with #89dbee, selections Modify - Select Selection Borders with these setting both sides,anti-alias checked border width-2, apply Adjust - Add Noise with these setting random, monochrome check noise-100,
apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black


3.Open up your EF_Element49 copy and paste as new layer resize 60% DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,Blend mode change to screen


4.Open up your EF_Element60 copy and paste as new layer resize 60%,Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,



5.Open up your EF_Element41 copy and paste as new layer resize 60%,Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,



6.CLose off your Copy Layers and merge visiable, reopen all other layers


7.Go back to your merge visiable layer and change blend mode to screen,Make your left size invisible Merge Visible Together Apply Filter AAA Frame - Foto Frame with these setting:Default Width:12,Red:20 Green:20 Blue:20
Opacity:80


8.Open up your EF_Element69 copy and paste as new layer ,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥It's Always Been You In My Heart-Banner♥

                                                                        


This tutorial was written by me on April 3, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Broken Sky Dezine Called It's Always Been You you can get here
I used the artwork of Barbara Jensen You have to be licensed to use this artwork and it can be purchased here

CheckPattern by Me


Plug-ins used:
Muras Meister - Copies
AAA Frame - Foto Frame
DSB Flux Linear Transmission


Open a new Canvas 852x315 Transparent


1.Selcet all Open up your BSD_7 copy and paste into selections,Muras Meister Copies - Wall Paper Rotate
Duplicate,Go on the Original Layer,Adjust - Blur - Motion Blur, with these setting Angle:90.00 Strength:100,Go on Copy Layer Adjust - Blur - Radial Blur with these setting:blur type:Twirl,Blur:50,0,Center:0,0,10 elliptical check,Effect - Edge Effects - Enhance More
Filter DSB Flux Linear Transmission with these setting 15,12,50 Horizontal.


2.Open up my pattern, Add new layer copy and paste pattern in to selections,select all float defloat Invert go to your copy layer press delete on your keybroad,invert Select - Modify - Select Selection Borders with these setting both sides,anti-alias checked border width-2, apply Adjust - Add Noise with these setting random, monochrome check noise-100


3.Delete pattern layer


4.Go to your copy raster apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black, Go To your Blend mode change to screen


5.Open up your BSD_13 copy and paste as new layer resize 60%,Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


6.Open up your BSD_11 copy and paste as new layer resize 60%,Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


7.CLose off your Copy Layers and merge visiable, reopen all other layers


8.Go back to your merge visiable layer and change blend mode to screen,Make your left Tube invisible Merge Visible Together Apply Filter AAA Frame - Foto Frame with these setting:Default Width:12,Red:20 Opacity:80


9.Open up your tube copy and paste as new layer resize 60%,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


10.Make the merge and your Tube Visible New Layer Select All Image - Crop to Selection,Back to Tube Filter AAA Frame - Foto Frame (same Settings like before)


Open up your BDS_30 copy and paste as new layer,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,Change blend mode to Luminance(lagacy)


Take your text tool and write It's Always Been You In My Heart. Gradient glow white fat line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥A Magical Land Banner♥

This is my frist time make banner,i like how turn out:)

This tutorial was written by me on April 2, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Lise-Lotte Sunesen Called A Magical Land FS you can get here


Muras Meister - Copies
AAA Frame - Foto Frame


CheckPattern by Me here


Open a new Canvas 852x315 Transparent yeah i know it bit big but we crop layer


1.Selcet all Open up your lhsPAPER_kitAMagicLand_011 copy and paste into selections,Muras Meister Copies - Wall Paper Rotate
Duplicate,Go on the Original Layer,Adjust - Blur - Motion Blur, with these setting Angle:90.00 Strength:100,Go on Copy Layer Adjust - Blur - Radial Blur with these setting:blur type:Twirl,Blur:50,0,Center:0,0,10 elliptical check,Effect - Edge Effects - Enhance More
Filter DSB Flux Linear Transmission with these setting 15,12,50 Horizontal.


2.Open up my pattern, Add new layer copy and paste pattern in to selections,select all float defloat Invert go to your copy layer press delete on your keybroad,invert Select - Modify - Select Selection Borders with these setting both sides,anti-alias checked border width-2, apply Adjust - Add Noise with these setting random, monochrome check noise-100


3.Delete your raster2 with pattern,


4.Go to your copy raster 2 apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black, Go To your Blend mode change to screen


5.Open up your lhsGRASS_kitAMagicLand_01 resize 30% copy and paste as new layer resize 60%x2,Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


6.Open up your lhsCLOUD_kitAMagicLand_01 copy and paste as new layer resize 30%x2, Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


7.Open up your lhsOWL_kitAMagicLand_01 copy and paste as new layer resize 30%x2, Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


8.Open up your lhsLEAF_kitAMagicLand_01 copy and paste as new layer resize 30%x2, Image Mirror,place on your left DUplicates Image Mirror,apply dropshadow with these setting:V-H:0 Opacity:100 Blur:15.00 color:black,


9.CLose off your Copy Layers and merge visiable, reopen all other layers


10.Open up your lhsRAINBOW_kitAMagicLand_01 copy and paste as new layer


11.Go back to your merge visiable layer and change blend mode to screen,Make your left Tube invisible Merge Visible Together Apply Filter AAA Frame - Foto Frame with these setting:Default Width:12,Red:20 Opacity:80


12.Make the Tube Visible New Layer Select All Image - Crop to Selection,Back to Tube Filter AAA Frame - Foto Frame (same Settings like before)


13.Take your text write A Magical Land,gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


Add your copyright info and your watermark/logo


I Hope you Enjoy my tutorial and come visit again real soon!