♥Sea Water♥

 This tutorial was written by me on August 8, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.

Scrapkit of choice. I used a PTU kit by Designing Scraps Called Sea water (Full-size) ScrapKit buy it at purchased here

I'm using the amazing artwork of Pinuptoons You can purchase a license for this tube here


Plug-ins needed:
Xero Filters - Illustrator
Xero - Fritillary ,
Penta Filters - VTR2
Template Of Choice was from Vickie Tutorials21 you can get hereMask of choice: I used mask wsl_mask84 from wee here ty for sharing your masking :).Open up the template.
Shift + D.
Close out the original.
Delete following:©
Image/Canvas Size:700x700
1.Click on your Grey Circle select all float defloat modify expand by 1 smooth 5,5 Open up your beach theme of choice copy and paste as
new layer selections invert edit cut,Duplicate the photo layer. Highlight the top photo layer. Select, float and defloat. Apply Xero Filters - Illustrator with the following settings:
50,50,128 Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings:4,11,233,0,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
2.Click on your Grey Circle select all float defloat modify expand by 6 smooth 5,5 add new layer flood with #0d7578, adjust add noise/remove noise add noise with these setting:
random Monochrome noise 50% Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
3.Merge down your Left Black Strip and Right 4 Black Strips together,select all float defloat modify expand by 1 smooth 5,5 Ad new layer flood with #ebd58a Apply
Photoeffex scranlines with these setting 2,2,20,10,2,2, Vertical toggle checked Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
4.Click on your Merge layer that you work on in step 3 select all float defloat modify expand by 6 smooth 5,5 add new layer flood with #0d7578, adjust add noise/remove noise add noise with these setting:
random Monochrome noise 50% Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
5.Merge down your Top Black Square and Bottom Black Square together,select all float defloat modify expand by 1 smooth 5,5 Ad new layer flood with #ebd58a Apply
Photoeffex scranlines with these setting 2,2,20,10,2,2, Vertical toggle checked Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
6.Click on your Merge layer that you work on in step 3 select all float defloat modify expand by 6 smooth 5,5 add new layer flood with #0d7578, adjust add noise/remove noise add noise with these setting:
random Monochrome noise 50% Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
7.Open up your Seawaterdnscrapselepufkitpalmer2 copy and paste as new layer resize 40%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
8.Open up your Tube copy and paste as new layer ,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
9.Open up your Seawaterdnscrapselepufkitseagull copy and paste as new layer resize 70%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
9.Open up your SeaWaterdnscrapspukitlighthouse copy and paste as new layer resize 50%x2,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
9.Open up your SeaWaterdnscrapspukitboard copy and paste as new layer resize 50%x2,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.

♥SeaSide Babe♥

  

   This tutorial was written by me on August 5, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Chichi Designz Called SeaSide at purchased here
I used the artwork of Amy Matthews You have to be
licensed to use this artwork and it can be purchased here
Plug-ins needed:
Xero Filters - Illustrator
Xero - Fritillary ,
Penta Filters - VTR2

Template Of Choice was from Beckyp creations 166 you can get here
Open up the template.
Shift + D.
Close out the original.
Delete following:Top 7 layers and wavy lines
Image/Canvas Size:700x700
1.Click on your Circle select all float defloat modify expand by 1 smooth 5,5 Open up your beach theme of choice copy and paste as
new layer selections invert edit cut,Duplicate the photo layer. Highlight the top photo layer. Select, float and defloat. Apply Xero Filters - Illustrator with the following settings:
50,50,128 Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings:4,11,233,0,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
2.Click on your Background select all float defloat modify expand by 1 smooth 5,5 add new layer flood with #257181,Apply Xero-Fritillary with these setting 5,30,25,9,
3.Click on your bg frame select all float defloat modify expand by 1 smooth 5,5 add new layer flood with #39c5ce, Adjust add/remove noise add noise with these setting Gaussisan Monochrome checked noise 45%,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
4.Click on your rectangle bg 2 select all float defloat modify expand by 1 smooth 5,5 add new layer flood with #39c5ce, Adjust add/remove noise add noise with these setting Gaussisan Monochrome checked noise 45%,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
2.Click on your Rectangle select all float defloat modify expand by 1 smooth 5,5 add new layer flood with #257181,Apply Xero-Fritillary with these setting 5,30,25,9,
4.Click on your circle frame select all float defloat add new layer flood with #39c5ce, Adjust add/remove noise add noise with these setting Gaussisan Monochrome checked noise 45%,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
5.Open up your PalmTree_CD_SeaSide Copy and paste as new layer resize 70%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
6. Open up your BeachChair_CD_SeaSide Copy and paste as new layer resize 60%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
7. Open up your Sand_CD_SeaSide Copy and paste as new layer Duplicates Image Merge down,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
8. Open up your Plants_CD_SeaSide Copy and paste as new layer ,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
9. Open up your PicknickBasket_CD_SeaSide Copy and paste as new layer resize 60%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.
10.Open up your Tube copy and paste as new layer,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.

♥ToesInTheSand♥

 This tutorial was written by me on July 31, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me.
It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.

Scrapkit of choice. I used a PTU kit by Jackie's Jewels Called ToesInTheSand
buy it at Scrappin Dollars


I used the artwork of VERYMANY You have to be licensed to use this
artwork and it can be purchased here


Plug-ins used:
EyeCandy4000- gradient glow
Lokas Software - 3D Shadow


Open new canvas 700x700
1.Open up your Frame copy and paste as new layer resize 70%,Take your magic wand Click inside Modify expand by 10 Add new layer flood with Paper9,
Open up your Close up tube and change Mode Blend too Lumianance Legacy Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
2.Open up your PalmTree2 copy and paste as new layer resize 60%,Select all float defloat Promoted Selection move tree up to frame layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
3.Open up your Tube copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
4.Open uo your ShellChain copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
5.Open up your Umbrella copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
6.Open up your Sandpile copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.
7.Open up your Sandcastle copy and paste as new layer resize 60%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

♥Summer Fun♥

This tutorial was written by me on July 17, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.





Scrapkit of choice. I used a PTU kit by Gina's Gems Scraps Called Summer Fun can be purchased here





I used the artwork of Keith Garvey You have to be
licensed to use this artwork and it can be purchased here




Plug-ins needed:
Xero Filters - Illustrator
Xero - Porcelain,
Penta Filters - VTR2




gemsmask-158 by Gems Taggin Scraps you can get here




Template DBV you needed is DBV Scorpio tag template.psd you can get here




Open the Template in psp - Duplicate (Shift+D) - Close Orginal out
Canvas Size 700x700, Delete following Raster 5,Promoted Selection,Promoted Selection 1,Raster 3,
Copy (3) of Raster 2,Copy (2) of Raster 2




1.Click on your raster2 select all float defloat Modify expand by 1 Modify smooth 5,5 add new layer flood with GGS_Summer Fun_Paper 30,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




2.Click on your Copy of Raster 2 select all float defloat Modify expand by 1 Modify smooth 5,5 add new layer flood with GGS_Summer Fun_Paper 3,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




3.Click on your raster7 select all float defloat Modify expand by 1 Modify smooth 5,5 add new layer flood with GGS_Summer Fun_Paper 30,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




4.Click on your Copy of Raster7 select all float defloat Modify expand by 1 Modify smooth 5,5 Open up your beach theme of choice copy and paste as
new layer selections invert edit cut,Duplicate the photo layer. Highlight the top photo layer. Select, float and defloat. Apply Xero Filters - Illustrator with the following settings:
50,50,128 Change the blend mode of the layer to Multiply. Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings:4,11,233,0,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




5.Click on your Copy of Raster 8 2 blackcircles select all float defloat Modify expand by 1 Modify smooth 5,5 add new layer flood with GGS_Summer Fun_Paper 3,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.





6.Click on your grey circles raster8 select all float defloat Modify expand by 1 Modify smooth 5,5 add new layer flood with GGS_Summer Fun_Paper 30,
Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




7.Go back to your Beach Theme layer close off both layers, click on your raste 4 select all float defloat open up your tube copy and paste as new layer,
selections invert edit cut, open up your beach theme, On your tube layer apply Xero - Porcelain using the default settings.Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




8.Open up your GGS_Surfboard Copy and paste as new layer resize 70%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




9.Open up your GGS_Poll Raft Copy and paste as new layer resize 50%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




10.Open up your GGS_Deck Chair Copy and paste as new layer resize 60%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




11.Open up your GGS_Butterfly Raft Copy and paste as new layer resize 60%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.




12..Open up your GGS_Word Tag Raft Copy and paste as new layer resize 60%,Give it a drop shadow of H 0, V 0, Opacity 65, Blur 8.00.

♥SummerDay♥

    

This tutorial was written by me on July 16, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.



Scrapkit of choice. I used a PTU kit by DESIRENA DESIGNS
Called SummerDay Tagger Size ScrapKit can be purchased The PSP Project



No Template,no tube


Plug-in Needed:
EyeCandy4000- gradient glow for © and your name



1.Open up your DD_SD_Frame1 copy and paste as new layer resize 80%, take your magic wand click in side your frame modify expand by 10,Add new layer flood with DD_SD_P6,


2.Open up your DD_SD_Sand copy and paste as new layer sent to bottom,Give dropshadow of choice


3.Open up your DD_SD_PalmTree copy and paste as new layer sent to bottom,Give dropshadow of choice


4.Open up your DD_SD_flower and DD_SD_flower 2 copy and paste as new layer Duplicates Image Mirror,Give dropshadow of choice


5.Open up your DD_SD_Mermaid copy and paste as new layer ,Give dropshadow of choice


6.Open up your DD_SD_Seahorse copy and paste as new layer ,Give dropshadow of choice

♥Beach Bum♥

  This tutorial was written by me on July 15, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.








Scrapkit of choice. I used a PTU kit by Creative Scraps by Crys Called Beach Bum can be purchased here




Template is by Kylie and can be gotten Here (Creative Misfits)



I used the artwork of Keith Garvey You have to be
licensed to use this artwork and it can be purchased here



Plug-ins needed:
Lokas Software - 3D Shadow


gemsmask-109 by Gems Taggin Scraps you can get here

Open up your template
Duplicates (Shift+D)
Delete following: © and Spring W/A 1 & 2 Layers,flowers,Glitter-trail



1.Click on your BigCircle-bg . select all float defloat selections modify expand by 1, selections modify feather by 2 add new layer Flood with BB_Paper_4,Apply Gradient Glow Fat what Line,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



2.Click on your SmallCircle-bg . select all float defloat selections modify expand by 1, selections modify feather by 2 Open up your Beach Scene copy and paste as new layer selections invert delete ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



3.Click on your 4-Squares-frame . select all float defloat selections modify expand by 1, selections modify feather by 2 Open up your BB_Paper_9 copy and paste as new layer selections invert delete
Open up your Tube copy and paste as new layer selections invert delete, Change Opacity to 50 %, give your tube layer and paper layer Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



4.Open up your BB_Element_3 copy and paste as new layer resize 80%,sent to bottom,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



5.Drop Shadow All the Frames Layers



6.Open up your BB_Element_9 copy and paste as new layer resize 40% Duplicates **refer my tag**, Merge down,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black




7.Open up your BB_Element_65 copy and paste as new layer sent to bottom,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



8.Open up your Tube copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



9.Open up your BB_Element_1 copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



10.Open up your BB_Element_7and BB_Element_9 copy and paste as new layer resize 50% x3,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black



11.Open up your BB_Element_32 copy and paste as new layer resize 80% ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black

♥Beachside♥

  This tutorial was written by me on July 14, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.

Scrapkit of choice. I used a PTU kit by DesignedByStina Called BeachsideRetreat (Full Size) buy it at here



I'm using the artwork of ELLIE_MILK over at PFD HERE



Plugins:

Xero Filters - Illustrator

Penta Filters - VTR2 & Dot and Cross

Image of choice. I got mine from www.scx.hu.My Template 9 you can get here

1.Click on your Middle Rectangle . select all float defloat selections modify expand by 1, selections modify feather by 2 add new layer Flood with
#5f93c5 Add new layer Flood with your Image Duplicates Top layer Apply Xero Filters - Illustrator with the following settings: 137,88,203,Change the blend mode of the layer to Multiply.
Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings: 4,11,233,0 Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


2.Click on your Right Rectangle . select all float defloat selections modify expand by 1, selections modify feather by 2 add new layer Flood with
#5f93c5 Add new layer Flood with your Image Duplicates Top layer Apply Xero Filters - Illustrator with the following settings: 137,88,203,Change the blend mode of the layer to Multiply.
Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings: 4,11,233,0 Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


3.Click on your left Rectangle . select all float defloat selections modify expand by 1, selections modify feather by 2 add new layer Flood with
#5f93c5 Add new layer Flood with your Image Duplicates Top layer Apply Xero Filters - Illustrator with the following settings: 137,88,203,Change the blend mode of the layer to Multiply.
Highlight the bottom photo layer and apply Penta Filters - VTR2 with the following settings: 4,11,233,0 Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


4.Click on your Middle Frame,left frame and Right frame . select all float defloat selections modify expand by 1, selections modify feather by 2 add new layer Flood with #5f93c5 Apply Penta - Dot and Cross
72,10,2 Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


5.OPen up your DBS_Net02 copy and paste as new layer resize 80%,Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


6.Open up your Tube copy and paste as new layer resize 60%x3 Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


7.Open up your DBS_Floral07 copy and paste as new layer resize 50% Duplicates Image Mirror,Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00


8.Open up your DBS_Lavendar copy and paste as new layer resize 50% Give the layer a drop shadow of H and V 0, Opacity 65, Blur 8.00

♥SummersInAugust♥

  This tutorial was written by me on July 10, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by Amy Marie Called SummersInAugust can be purchased here


I used the artwork of Robert Freeman You have to be licensed to use this artwork and it can be purchased here


Plugins Used:

Xero Fritillary
Eye Candy4000 GradientGlow
Lokas 3D Shadow


Open new Canvas 800x800 Transparent


1.Open up your Frame6 copy and paste as new layer resize 70% take your magic wand click inside modify expand by 10 add new layer flood with pp013 copy and paste into selections,apply Xero-Fritillary with these setting 5,30,25,9,
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your Palmtree2 copy and paste as new layer move to the right of the frame Select all float Invert Grab the eraser and erase the the palmtree so it looks like
it is coming out of the frame Selections Select None


3.Open up your Sand copy and paste as new layer Sent to bottom,apply Xero-Fritillary with these setting 5,30,25,9,


4.Open up your fence1 copy and paste as new layer resize 50% Duplicates Image Mirror,Use your Pick tool and Bring Fence closer on side in middle ,click in middle and move down to bit,
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your grass1 copy and paste as new layer resize 60% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your Tube copy and paste as new layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Open up your flower1 copy and paste as new layer resize 50%x2 Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

♥ Tropical Summer♥

 This tutorial was written by me on July 8, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me.
It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by DELICATE-PEARL Called Tropical Summer
buy it at here or here


I used the artwork of Jose Cano You have to be licensed to use this
artwork and it can be purchased here
Template of choice: I used template #150 by HorsePlay'sPastureDesign.

Plug-ins used:
EyeCandy4000- gradient glow
Lokas Software - 3D Shadow
Xero-Fritillary





1.Click on your square1and square2 select all float defloat Selections Modify expand by 1 Selections Modify Smooth by 5,5
Add new layer flood with #e896ac, Apply Xero Fritillary with settings at 5, 25, 15 and 6.Keep select ,Apply Gradient Glow With these setting, Basic Glow width is 6.77 soft corners 25,Overall Opacity 100,Color:fat white line,
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



2.Click on your Rectangle select all float defloat Selections Modify expand by 1 Selections Modify Smooth by 5,5
Add new layer flood with #851e39 Apply Xero Fritillary with settings at 5, 25, 15 and 6.Keep select ,Apply Gradient Glow With these setting, Basic Glow width is 6.77 soft corners 25,Overall Opacity 100,Color:fat white line,
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



3.Click on your Circle select all float defloat Selections Modify expand by 1 Selections Modify Smooth by 5,5
Add new layer flood with #a94d5a Apply Xero Fritillary with settings at 5, 25, 15 and 6.



4.Click on your Glitter Circle select all float defloat Selections Modify expand by 1 Selections Modify Smooth by 5,5
Add new layer flood with #f6d8e2 select all float defloat Selections Modify expand by 1 Selections Modify Smooth by 5,5
Add new layer flood with #851e39 Apply Xero Fritillary with settings at 5, 25, 15 and 6.Keep select ,Apply Gradient Glow With these setting, Basic Glow width is 6.77 soft corners 25,Overall Opacity 100,Color:fat white line,
Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



5.Open up your DPl - Tropical Summer - el11 copy and paste as new layer resize 40%, Apply Mura's Meister copies Encircle Default setting,
Place on your Glitter Circle,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



6.Open up your DPl - Tropical Summer - el04 copy and paste as new layer resize 60% ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



7.Open up your DPl - Tropical Summer - el09 copy and paste as new layer resize 60% ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



8.Open up your DPl - Tropical Summer - el02 copy and paste as new layer resize 60% ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



9.Open up your DPl - Tropical Summer - el01 And DPl - Tropical Summer - el11 copy and paste as new layer resize 50%x2 ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



10. Merge these 5 top layers together Duplicates Image Mirror,



11.Open up your DPl - Tropical Summer - el21copy and paste as new layer resize 60% Duplicates Image Mirror ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.



12.Open up your Tube Copy and paste as new layer ,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom
100, Offset X-Y by 5, Perspective at 35 color black.

♥GoodShip Lolly Pop♥

  This tutorial was written by me on June 30, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.




Scrapkit of choice. I used a PTU kit by *Sleek n Sassy Designz *Called Summer Sailing
buy it at Scrappin Dollars


I used the artwork of Caron Vinson You have to be licensed to use this artwork and it can be purchased here

Plug-ins used:
EyeCandy4000- gradient glow
AAA- Photoframe

                        Template Of Choice :Template038 by Spawns and can be found : HERE


1.Click on your Middle Grey Strip select all float defloat,Add new layer flood with #8ab8c7 select none
apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

2.Click on your Bottom Black Strip select all float defloat,Add new layer flood with #8ab8c7 select none
apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

3.Click on your Top Black Strip select all float defloat,Add new layer flood with #8ab8c7 select none
apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

4.Click on your Bottom White Thin Lines select all float defloat,Add new layer flood with #051e76, Duplicates Give your Bottom,
Adjust Blur-Gaussian 6.00, Merge down,apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

5.Click on your Top White Thin Lines select all float defloat,Add new layer flood with #051e76, Duplicates Give your Bottom,
Adjust Blur-Gaussian 6.00, Merge down,apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

6.Click on your Bottom Grey Frame select all float defloat,Add new layer flood with #8ab8c7,
Apply Inner Bevel Bevel #2, Width 13, Smoothness 15, Depth 9, Ambience-35,Shininess 34, Angle 134, Intensity 40, Elevation 80 color: white

7.Click on your Top Grey Frame select all float defloat,Add new layer flood with #8ab8c7,
Apply Inner Bevel Bevel #2, Width 13, Smoothness 15, Depth 9, Ambience-35,Shininess 34, Angle 134, Intensity 40, Elevation 80 color: white

8.Click on your Left & Right Grey Frame Strips select all float defloat,Add new layer flood with #8ab8c7,
Apply Inner Bevel Bevel #2, Width 13, Smoothness 15, Depth 9, Ambience-35,Shininess 34, Angle 134, Intensity 40, Elevation 80 color: white

9.Click on your Middle Background select all float defloat,Add new layer flood with #8ab8c7 select none
apply Effects - Artistic Effects - Halftone Cell Properties: Halftone pattern Line Size3,Screen angles 45,45,45 Color scheme RGB,
Use as overlay Blend mode is Overlay Opacity 20%

10.Click on your Top Grey Frame select all float defloat,Add new layer flood with #8ab8c7,
Apply Inner Bevel Bevel #2, Width 13, Smoothness 15, Depth 9, Ambience-35,Shininess 34, Angle 134, Intensity 40, Elevation 80 color: white

11.Open up your SS_Element10 copy and paste as new layer resize 30%,DropShadow..Vertical & Horizontal 2, Opacity 50, Blur 5, Shadow on new layer - unchecked

12.Open up your SS_Element24 copy and paste as new layer resize 70%,DropShadow..Vertical & Horizontal 2, Opacity 50, Blur 5, Shadow on new layer - unchecked

13.Open up your Tube copy and paste as new layer resize 90% DropShadow..Vertical & Horizontal 2, Opacity 50, Blur 5, Shadow on new layer - unchecked

14.Open up your SS_Element2 copy and paste as new layer resize 30%x2,DropShadow..Vertical & Horizontal 2, Opacity 50, Blur 5, Shadow on new layer - unchecked

15. Merge Visible.
AAA- Photoframe with these Settings:Width:10,Brightness:-255 Stroke:255 Matte:0 Red and Green and Blue:0 Opacity:100

♥Catch Wave♥

This tutorial was written by me on June 28, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by HorsePlay'sPastureDesigns Called This tutorial was written by me on June 1, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by HorsePlay'sPastureDesigns Called  By The Baybuy it at purchased  here or here





I used the artwork of Elias Chatzoudis You have to be licensed to use this artwork and it can be purchased here




Open new Canvas 700x700 Flood fill with white



1.Open up your hpd_BTB_22 take your magic wand click inside Selection sModify expand by 5, Open up your Image **Ocean** copy and paste as new layer,
Selections Invert Delete Edit Cut,



2.Open up your Tube Copy and paste as new layer Apply Xero-Porcelaid with these setting 50,128,164,0,0,255



3.I wanted my main tube to look like she was caught up To achieve this
Duplicate net and have one above and below your main tube Working on top net layer gently erase parts
Take your time and if necessary start over When adding drop shadow add it to bottom net only



4.Open up your hpd_BTB_32 copy and paste as new layer resize 60%, Duplicates Move above your net, that your tube hand part rest on it



5.Open up your hpd_BTB_49 copy and paste as new layer resize 40%, Duplicates Image Mirror



6.Open up your hpd_BTB_51 copy and paste as new layer resize 60%



~*~*~Open animation~*~*~



Back in PSP close off all layers except for the water pic and then right click copy merged and right click paste into AS as new animation. Then go to Effects-Insert Image Effect-Click underwater



Click ok. You should have 8 frames, erase frame 1 for a total of 7 frames, Select All (ctrl+A) minimize for now.

Now go back to PSP and close off the ocean pic and open all the frames that are UNDER the ocean pic including your copyright layer, right click copy merged, and paste into AS as new animation, then right click copy, then right click paste after current frame, repeat this process until you have a total of 7 frames. Select All then open up the first animation of the ocean pic and right click copy, then on the second animation right click paste into selection. (make sure all frames are still highlighted)

Now go back to PSP and close off all those layers you just brought over to AS and open all the layers that are ABOVE the ocean pic, right click copy merged, then right click paste into selection.
View animation!

♥Down By The Seaside♥

                                                       



This tutorial was written by me on June 23, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.Scrapkit of choice. I used a PTU kit by Black Widow Creationz Called Under The Sea at purchased here


I used the artwork of Elias Chatzoudis You have to be licensed to use this artwork and it can be purchased here



Open template in psp
Duplicates (Shift+D)
Close out the original.
Delete Following (Designer Info)and wordart layers,
Canvas size 700x700


Template: I used Templates47 by -♥-Divine Intentionz-♥-  you can get herePlugins Used:
Xero Fritillary
EyeCandy 4000 Gradient Glow 


1.Add new layer Flood with your BWC_UndertheSea_PP9 Apply your mask WSL_Mask7 Duplicates Image Mirror, Merge down,
Apply Fritillary with these setting Granularity-14,aggression-146 tesselation-27 variation-43,




2.Click on your rounded edge rectangle bit1 And rounded edge rectangle bit2. select all float defloat selections modify expand by 1,
selections modify feather by 2 add new layer flood with BWC_UndertheSea_PP6 Apply Xero-Fritillary with these setting Granularity-5,
aggression-30 tesselation-100 variation-97 Apply Gradient Glow Color-Black,Duplicates Merge Down,
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked




3.Click on your frame background1 and frame background2 and frame background3. select all float defloat selections modify expand by 1,
selections modify feather by 2 add new layer flood with BWC_UndertheSea_PP9,Apply Blinds with the following settings
Width - 5 Opacity - 25 Color - WHITE Horizontal - Not Checked Light From Top - Checked,




4.Click on your frame1 And frame2 And frame3. select all float defloat selections modify expand by 1,
selections modify feather by 2 add new layer flood with BWC_UndertheSea_PP6 Apply Xero-Fritillary with these setting Granularity-5,
aggression-30 tesselation-100 variation-97 Apply Gradient Glow Color-Black,Duplicates Merge Down,
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

5.Open up your BWC_UndertheSea_EL25 copy and paste as new layer Duplicates Mirror,Merge Down,Apply Gradient Glow Color-Black,Duplicates Merge Down,
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked




6.Open up your BWC_UndertheSea_EL1 copy and paste as new layer Resiz 60% Duplicates Mirror, Image Flip Merge Down,Apply Gradient Glow Color-Black,Duplicates Merge Down,
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked



7Open up your BWC_UndertheSea_EL18 copy and paste as new layer Resiz 60% Duplicates Mirror, Image Flip Merge Down,Apply Gradient Glow Color-Black,Duplicates Merge Down,
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked




8.Open up your Tube copy and paste as new layer resize 90%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked



9.Open up your BWC_UndertheSea_EL10 copy and paste as new layer resize 60%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked



10.Open Up your BWC_UndertheSea_EL4 copy and paste as new layer resize 90%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

♥By Bay♥

This tutorial was written by me on June 19, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.



Scrapkit of choice. I used a PTU kit by Designing Scraps
Sea water (Tagger) ScrapKit can be purchased scrappinwithfriends 


I used the artwork of Elias Chatzoudis You have to be licensed to use this artwork and it can be purchased here 


Plugins Used:
Xero porcelain,
Eye Candy4000 GradientGlow
Photo Effex Scanlines


Template: I used Templates8 by -♥- Creationz byWitchys Heart-♥- you can get here 


Open template in psp
Duplicates (Shift+D)
Close out the original.
Delete Following (Designer Info)


1.Click on your Raster5 & Copy of Raster 5 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #47bbae Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle unchecked


2.Click on your Raster6 & Copy of Raster 6 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #e8d670 Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle unchecked
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black


3.Click on your Raster3 & Copy of Raster 3 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #47bbae Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle checked


4.Click on your Raster4 & Copy of Raster 4 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #e8d670 Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle Checked
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black


5.Open up your Seawaterdnscrapspukitlifeguard copy and paste as new layer resize 40% Duplicates Image Mirror,Image Flip,
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black


6.Open up your Seawaterdnscrapspukitsand copy and paste as new layer resize 60% Duplicates Image Mirror,
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black


7.Click on your Raster1 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #47bbae Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle Checked


7.Click on your Raster2 select all float defloat,selections modify expand by 1
selections feather by 2 add new layer flood with #e8d670 Apply Photo Effex Scanlines 2,2,20,10,2,2 Vertical Toggle Checked


8.Open up your Tube copy and paste as new layer Invert Edit Cut, Duplicates Move to your Bottom Right
Circle,Apply Xero porcelain set at 50/128/128/0/0/255,Duplicates On the duplicated tube layer, adjust, blur, Gaussian Blur set to 5
Layers, properties, change blend mode to screen and lower the opacity to about 70
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked


9.Click on your Oval Circle select all float defloat Open up your Seawaterdnscrapspukitlighthouse copy and paste
as new layer selections invert delete DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked


10.Open up your Seawaterdnscrapspukitseagull copy and paste as new layer,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked


11..Open up your Seawaterdnscrapspukitpelican copy and paste as new layer resize 40%x2
,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

♥I Love The Sea♥

  This tutorial was written by me on June 18, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.

Scrapkit of choice. I used a PTU kit by Cindys Creative Designs Called I Love The Sea can be purchased here

I used the artwork of Robert Freeman You have to be licensed to use this artwork and it can be purchased here

Plugins Used:

Xero porcelain,
Eye Candy4000 GradientGlow

Template: I used Templates109 by Scraps Of Enchantment you can get here

Open template in psp
Duplicates (Shift+D)
Close out the original.
Delete Following (Designer Info) Brush and Stars GreyStrip

1.Click on your CircleBackground select all float defloat,selections modify expand by 1
selections feather by 1 add new layer Open A Image Choose copy and paste your Image Into selections keep selections
Add new layer flood with CCD_PAPER2 Change Blend mode to overlays select none

2.Click on your CircleFrame select all float defloat,selections modify expand by 1
selections feather by 1 add new layer #46586e Apply Gradient Glow White Fat Line,
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black

3.Click on your TopBackground select all float defloat,selections modify expand by 1
selections feather by 1 add new layer Open A Image Choose copy and paste your Image Into selections keep selections
Add new layer flood with CCD_PAPER2 Change Blend mode to overlays select none

4.Click on your BottomBackground select all float defloat,selections modify expand by 1
selections feather by 1 add new layer Open A Image Choose copy and paste your Image Into selections keep selections
Add new layer flood with CCD_PAPER2 Change Blend mode to overlays select none

5.Click on your TopFrame select all float defloat,selections modify expand by 1
selections feather by 1 add new layer #46586e Apply Gradient Glow White Fat Line,
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black

6.Click on your BottomFrame select all float defloat,selections modify expand by 1
selections feather by 1 add new layer #46586e Apply Gradient Glow White Fat Line,
Apply Vertical&Horizonal:0 Opacity 60 blur 10 color Black

7.Go to your Top frame Click inside with your magic wand selections modify expand by 8,
copy and paste your Tube selections Invert Edit Cut,Apply Apply Xero porcelain set at 50/128/128/0/0/255,
Duplicates On the duplicated tube layer, adjust, blur, Gaussian Blur set to 5
Layers, properties, change blend mode to screen and lower the opacity to about 70
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

8.Go to your Bottomframe Click inside with your magic wand selections modify expand by 8,
copy and paste your Tube selections Invert Edit Cut,Apply Apply Xero porcelain set at 50/128/128/0/0/255,
Duplicates On the duplicated tube layer, adjust, blur, Gaussian Blur set to 5
Layers, properties, change blend mode to screen and lower the opacity to about 70
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

9.Open up your ccd_sand1 copy and paste as new layer duplicates Image Mirror,Merge down

10.Open up your ccd_wheel1 copy and paste as new layer resize 70%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

11.Open up your ccd_seaweed1 copy and paste as new layer DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

12.Open up your ccd_sign1 copy and paste as new layer resize 50x2%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked

♥Mystical Ocean ♥

 

 


 This tutorial was written by me on June 8, 2012. Any resemblance to any other tutorial is pure coincidence.
Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.
I wrote it assuming that you have a working knowledge of PSP and it's components.





Scrapkit of choice. I used a PTU kit by Ditzy Dezigns Called Mystical Ocean TS can be purchased here





I used the artwork of ELIAS CHATZOUDIS You have to be licensed to use this artwork and it can be purchased here


Template and Paper you can get here




Plugins Used:
Xero Fritillary and Porcelain
EyeCandy 4000 Gradient Glow





Open up your Template I give you in supples And Paper





1.Go back to your Template layer select all float defloat add new layer flood with #b2e5fb,
Xero Fritillary with settings at 5, 30, 10, 20.,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.





2.Open up your grass copy and paste as new layer resize 60%,Duplicates Image Mirror,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.





3.Open up your LightHouse1 copy and paste as new layer resize 60% ,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.





4.Open up your Octopus 1 copy and paste as new layer resize 50% ,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.





5.Open up your Dolphin 1 copy and paste as new layer resize 50% ,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.





6.Open up your Tube Copy and paste as new layer resize 60%,
Apply Xero porcelain set at 50/128/128/0/0/255,On the duplicated tube layer, adjust, blur, Gaussian Blur set to 5
Layers, properties, change blend mode to screen and lower the opacity to about 70
DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.


7.Open up your tube copy and paste as new layer resize 60%,DropShadow..Vertical & Horizontal 0, Opacity 60, Blur 10, Shadow on new layer - unchecked.


8.Take your rectangle and draw rectangle for your avatar Go Edit Copy and paste as new Image


Add any copyrights and your name. Save as a PNG.

♥Summer Cocktail♥

This tutorial was written by me on May 31, 2012. Any resemblance to any other tutorial is pure coincidence.

Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP.

I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by BIBIS COLLECTION Called SUMMER COCKTAIL buy it at here


I'm using the amazing artwork of Anna Marine You can purchase a license for this tube at CDO


Plugins Used:
DSB-Flux Bright Noise
photoeffex-scanlines
Xero porcelain


Mask 437 by Insatiable Dreams. here thanks Cat


Template 120 by Denz Designz here thanks hun


Open up your template
Duplicates (Shift+D)
Delete following: life is sweet 1&2 and heart line 1&2 and © and pink square Shadow 1
Canvas size 700x700


1.Click on your Large Blue Circle Select all float defloat

Add new layer layer flood with #5ed9f8, Apply photoeffex with these setting

2,2,20,10,2,2 vertical toggle checked
selections modify expand by 4 add new layer flood with white

Apply DSB-Flux Bright noise. Intensity-42 Directions Mix,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


2.Click on your pink square Select all float defloat

Add new layer layer flood with #59a4b5, Apply photoeffex with these setting

2,2,20,10,2,2 vertical toggle checked
selections modify expand by 4 add new layer flood with white

Apply DSB-Flux Bright noise. Intensity-42 Directions Mix,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


3.Click on your 2strips on top and 2strips on bottom select all float defloat

Add new layer flood with #5ed9f8, Apply photoeffex with these setting

2,2,20,10,2,2 vertical toggle checked
selections modify expand by 4 add new layer flood with white

Apply DSB-Flux Bright noise. Intensity-42 Directions Mix,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


4.Open up your Tube copy and paste as new layer resize 80%

Apply Xero porcelain set at 50/128/128/0/0/255


5.Click on your pink circle Select all float defloat

Add new layer layer flood with #59a4b5, Apply photoeffex with these setting

2,2,20,10,2,2 vertical toggle checked
selections modify expand by 4 add new layer flood with white

Apply DSB-Flux Bright noise. Intensity-42 Directions Mix,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


6.Open up your SUMMER COCKTAIL ELEM (15) copy and paste

as new layer resize 60%,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


7.Click on your blue circle Select all float defloat

Add new layer layer flood with #5ed9f8, Apply photoeffex with these setting

2,2,20,10,2,2 vertical toggle checked
selections modify expand by 4 add new layer flood with white

Apply DSB-Flux Bright noise. Intensity-42 Directions Mix,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


8.Go Back to Your Blue Circle and Your Pink Circle Select all float defloat

Contract by 5 add your Tube copy and paste as new layer selections invert edit cut

Apply Xero porcelain set at 50/128/128/0/0/255,On the duplicated tube layer, adjust, blur, Gaussian Blur set to 5

Layers, properties, change blend mode to screen and lower the opacity to about 70


9.Open up your SUMMER COCKTAIL ELEM (64) copy and paste

as new layer,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


10.Open up your SUMMER COCKTAIL ELEM (46) copy and paste

as new layer resize 60%,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


11.Open up your SUMMER COCKTAIL ELEM (40) copy and paste

as new layer resize 60%,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


10.Open up your SUMMER COCKTAIL ELEM (44) copy and paste

as new layer resize 60%,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


11.Open up your SUMMER COCKTAIL ELEM (43) copy and paste

as new layer resize 60%,Apply drop shadow H+1, V+1, O50, B5, colour #000000

Apply drop shadow H-1, V-1, O50, B5, colour #000000


Add any copyrights and your name.


I hope you enjoyed my tutorial and come visit again real soon!

♥Blue Summer♥

This tutorial was written by me on May 1, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice. I used a PTU kit by HF-Projekte Called Sweetsummer buy it at Inspirations Of Scrap Friends


I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here


Plug-ins used:
Lokas Software - 3D Shadow


Open new canvas 800x800 96.00dpi


1.open up your PHF_Sweetsummer31 copy and paste as new layer resize 50% Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.open up your PHF_Sweetsummer3 copy and paste as new layer resize 50%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your Tube copy and paste in behind your frames layers selections and promote selections take your selections and make rectangle around what hang around tube and cut,then change Blend mode Luminance (legacy),Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your PHF_Sweetsummer17 copy and paste as new layer resize 50%x2 Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your PHF_Sweetsummer25 copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your PHF_Sweetsummer9 copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Take your Blue Summer


Add any copyrights and your name.


I hope you enjoyed my tutorial and come visit again real soon!

♥SeaTurtle♥

This tutorial was written by me on March 30, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components


Scrapkit of choice: I used a PTU kit by DesignedByStina Called DolphinDreams buy it here

I used the artwork of PinupToon You have to be licensed to use this artwork and it can be purchased here

Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
xero: Fritillary
Anmations Shop
Tag Template by me #8 you can get here

1.Click on your Circle1 select all float defloat add new layer flood with #a1dadd,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your big circle select all float defloat add new layer flood with #a1dadd,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your Thin rectangle select all float defloat add new layer flood with #216592,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Click on your Thin long rectangle select all float defloat add new layer flood with #216592,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your Brownrectangle select all float defloat add new layer flood with #a1dadd,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Click on your middle rectangle select all float defloat add new layer flood with #388894,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Click on your border select all float defloat add new layer flood with #216592,apply Xero-Fritillary with these setting 5,30,29,8 gradient glow fat white line,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Go back to your middle rectangle select all float defloat, open up your DBS_Underwater01 copy and paste as new layer resize 60%, move over bit then selections invert delete on your keybroad, select none, duplicates image,,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your DBS_Seaweed copy and paste as new layer resize 50%,move down under your DBS_Underwater01 layer, Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


9.Open up your DBS_SeaTurtle copy and paste as new layer resize 40%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


10.Take your rectangle make rectangle inside your middle layer,add new layer Alien Skin Eye candy 5 - Impact - Glass with these setting factory default setting,Change blend mode to overlay,Add 4 raster layers below it,On all 4 add Effects - Artistic Effects - Balls and Bubbles with these settings, Automatic Multiple balls or bubbles checked,Coverage:30 Average Size:0 Size vaniation:80,Balls or Bubbles type: Non-instersecting,Just change the Seed slider for the next 3 :) Deselect


11.Open up your DBS_Bottle02 copy and paste as new layer resize 50%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


12.OPen up your Tube copy and paste as new layer resize 80%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


13.OPen up your DBS_Deco02, copy and paste as new layer, duplicates image mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


Add your copyright info and your watermark/logo


~*~Ready for Anmations Shop~*~


Your layer palette should have all of the tag visible with only one animated layer showing,
the other ones should have red Xs showing they are not visible.
Click Edit-Copy Merged, go into Animation Shop and click Edit-Paste-As New Animation.
Then back in PSP, close visibility on the first animated layer and open visibility on the next animated layer,
again Click Edit-Copy Merged, then go into Animation Shop and right click on the image you just pasted there and
choose Paste-After Current Frame. Repeat this for each animated layer and making sure each time in Animation Shop that you paste the new copy after the last frame
of the image there


Save as a .gif image


I Hope you Enjoy my tutorial and come visit again real soon!

♥OverSeaMermaid♥

This tutorial was written by me on March 22, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components


Scrapkit of choice. I used a PTU kit by Dnscraps Called Seasecrets at purchased here


I used the artwork of The Hunter You have to be licensed to use this artwork and it can be purchased here


All my tubes are a guide if the tubes i select are unavailble please use another tube of your like thank you


Plug-ins used:
Lokas Software - 3D Shadow
xero:fritillary
Open a new canvas 600x600 Transparent


1.Open up your seasecretsframe copy and paste as new layer resize 65% take your magic wand click inside modify expand by 10 add new layer flood with Image copy and paste into selections,apply Xero-Fritillary with these setting 5,30,25,9,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Open up your tube copy and paste as new layer resize 90%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Open up your seasecretsalgae copy and paste as new layer resize 50%,Duplicates Image Mirror,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Open up your seasecretsanchor copy and paste as new layer resize 50%x2 Image Free Rotate Turn right 6.00,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Open up your seasecretssea copy and paste as new layer resize 50% place top right, under your tube layer,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Open up your seasecretsfarol2 copy and paste as new layer resize 50%x2,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.

Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!

♥Summer Dream♥

This tutorial was written by me on March 19, 2012. Any resemblance to any other tutorial is pure coincidence. Please DO NOT claim this tutorial as your own or post it to any other blog or website without permission from me. It was written for PSP X, but should be compatible with any version of PSP. I wrote it assuming that you have a working knowledge of PSP and it's components.


Scrapkit of choice: I used a PTU kit by Lise-Lotte Sunesen Called LongingForSummerFS you can get here


I used the artwork of JenniferJanesko You have to be licensed to use this artwork and it can be purchased here



Plug-ins used:
Lokas Software - 3D Shadow
EyeCandy4000- gradient glow
Xero - Porcelain and Fritillary
photoeffex-scanlines


Template by Denz Designs template60 you can get here



Open up your template in psp
Duplicates (Shift+D) And Close out the original.
Delete Following: Wordart and Denz Designz


1.Click on your square back select all float defloat add new layer flood with lhsPAPER_kitLongingForSummer_10,apply Xero-Fritillary with these setting 5,30,25,9,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


2.Click on your circle dots select all float and defloat add new layer flood with lhsPAPER_kitLongingForSummer_4,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


3.Click on your strips dots select all float and defloat add new layer flood with lhsPAPER_kitLongingForSummer_8,Apply photoeffex-scanlines with these settings:2,2,20,10,2,0, vertical togger unchecked,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


4.Click on your Stars select all float defloat add new layer flood with lhsPAPER_kitLongingForSummer_10,apply Xero-Fritillary with these setting 5,30,25,9,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


5.Click on your Diamond shape select all float defloat add new layer flood with lhsPAPER_kitLongingForSummer_7,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


6.Click on your circle back select all float defloat add new layer flood with lhsPAPER_kitLongingForSummer_7,apply Xero-Fritillary with these setting 5,30,25,9,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


7.Click on your Circle Frame select all float defloat add new layer flood with lhsPAPER_kitLongingForSummer_10,apply Xero-Fritillary with these setting 5,30,25,9,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black.


8.Open up your Tube copy and paste as new layer selections invert delete on keybroad,apply Xero Porcelain with settings at 50, 120, 140, 122, 47 and 96


9.Open up your lhsLEAF_kitLongingForSummer_01 copy and paste as new layer resize 50% Duplicates Image Mirror,Image Flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


10.Open up your lhsLEAF_kitLongingForSummer_02 copy and paste as new layer resize 50% Duplicates Image Mirror,Image Flip,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


11.Open up your lhsOWL_kitLongingForSummer_02 copy and paste as new layer resize 40%x2 Duplicates,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


12.Open up your lhsLADYBUG_kitLongingForSummer_01 copy and paste as new layer resize 40%,Apply Lokas 3D Shadow with settings at B35, T60, Angles X,Y, and Z at 0, zoom 100, Offset X-Y by 5, Perspective at 35 color black


Add your copyright info and your watermark/logo


I hope you enjoyed my tutorial and come visit again real soon!